- Before You Install
- Back Up Existing StreamBase Workspace
- Maintaining Multiple StreamBase Releases
- Uninstalling a Previous Release of StreamBase
- Installation Procedure
- 64-Bit Windows Considerations
- Windows Start Menu Considerations
- Installing Additional Features
- Using the StreamBase Command Prompt
- Allow Connection If Your Firewall Prompts
- Using Cygwin or Other Alternate Shells
This page describes the installation of the TIBCO® Spotfire Data Streams base kit on Windows platforms. The base kit for Windows includes the StreamBase Studio authoring environment, the StreamBase Runtime, and support files for the StreamBase and LiveView Client APIs.
TIBCO LiveView™ Desktop and its companion Desktop Workspace Manager are installed with a separate procedure, described in Installing LiveView Desktop.
Before you install TIBCO Spotfire Data Streams, use the following checklist to make sure each target machine matches the prerequisites.
|Read through the Release Notes for the current release to look for any late-breaking information about installing on Windows.|
|If you have used StreamBase Studio on the target machine, back up your existing Studio workspace and configuration, as described below.|
|Confirm that the target machine is running a supported version of Windows with the latest updates. See Supported Configurations.|
|Confirm that the target machine's RAM and disk space requirements meet or exceed the minimums listed on Supported Configurations. This is especially important when running on virtual machines.|
|Depending on the target machine's configuration, you may need administrator rights to install into the default location.|
If you used a previous release of StreamBase Studio on the target machine, create
backup copies of your existing Studio workspace directories, before using StreamBase Studio in the current release.
Save the backup copy with filenames that indicate the version number of the release
you are archiving. For example, save
The default location of the StreamBase Studio workspace directory is described in Default Installation Directories. You may have specified a different directory the first time you ran StreamBase Studio.
You can install more than one release of TIBCO Spotfire Data Streams on the same Windows computer, with specific limitations outlined below.
Maintenance releases are always installed in the parent release's directory. For example, release 10.4.6 would be installed in the StreamBase 10.4 directory. If you also have a 10.3.x release on the same machine, it would not be affected by installing 10.4.6, because 10.3.x would be located in the
New maintenance releases replace any previously installed release for the same
major.minorversion on your system, which means you must uninstall the existing release in the same major.minor series.
Installing new releases of the same major.minor series does not impact existing StreamBase deployments. Your Studio workspaces persist independently of the installed software.
To install a maintenance release, you must first uninstall any existing version of
major.minor release. If you do
not, the StreamBase installer prompts you to uninstall the existing one.
Do not remove the StreamBase installation directory manually. That is, do not drag it to the Recycle Bin or select it and press Delete, or remove it at a command prompt. Instead, to uninstall a previous StreamBase release, use the Uninstall a program page in the Windows Control Panel.
Uninstalling a previous StreamBase release does not affect any StreamBase application files you created in that release. The StreamBase uninstaller only removes files that the installer placed on your disk, and deliberately leaves certain files in place:
Your StreamBase Studio workspace and configuration directories are preserved.
Any Eclipse plug-ins you downloaded and installed into StreamBase Studio are left behind, including any data, log files, and directories they use.
To install StreamBase on Windows, follow these steps:
If you are installing a maintenance release for an existing installation, first uninstall the existing StreamBase release, as described in Uninstalling a Previous Release of StreamBase.
Launch the TIBCO Spotfire Data Streams installer by running the
.msiinstaller file that you downloaded from the TIBCO distribution site.
The installer is named with the following pattern:
m.n.pindicate the major, minor, and maintenance release numbers.
Follow the instructions on screen to accept the StreamBase license agreement.
Accept the default StreamBase installation location or browse to a different location. However, NEVER try to overwrite an existing previous StreamBase installation.
Clickto begin the installation process.
On the installer's final screen, select the check box to open the post-installation README in your Web browser to see important information. The README describes the entries installed in the Windows Start menu for this release.
StreamBase is only supported on 64-bit Windows. This gives rise to the following considerations:
Microsoft does not support loading 32-bit shared libraries or DLLs into 64-bit processes. Thus, if you have any StreamBase plug-ins such as custom clients written in C++ with a previous StreamBase release, they must be recompiled for 64-bit operation.
The 64-bit StreamBase installation includes 64-bit link libraries for C++ and .NET, which allows you to rebuild any custom client applications for 64-bit operation.
Any embedded adapter that calls Windows-native libraries for underlying support must be adjusted to load the 64-bit version of those shared libraries, if available.
This section describes Windows Start menu changes made by the StreamBase and LiveView installers.
Links to run the included applications are placed in the Windowsmenu in the TIBCO folder.
Be aware that all pre-7.5.0 and pre-2.0.0 versions of installed StreamBase software continue to display as individual entries above the TIBCO folder entry.
On Windows 8, the StreamBase installer places an icon to start StreamBase Studio on the desktop, but does not initially appear to provide a way to start the other features installed.
However, you can switch to the Start tiles screen and use its search feature to
locate the phrases
LiveView. This results in entries clearly labeled, such as
StreamBase 10.4 Command Prompt.
The same Start menu structure is actually installed on Windows 8 as for Windows 7 as described in the previous section. However, Window 8 has famously lost its Start menu in favor of the start tiles mechanism.
TIBCO recommends the following procedure to allow you to start and run StreamBase and LiveView programs with ease from the Windows 8 desktop:
Open Windows 8 Desktop mode.
Double-click This PC to open a Windows Explorer window.
Navigate to the following location, or copy and paste this path in the Explorer window's navigation field:
C:\ProgramDatafolder is hidden by default, so you may need to select the Hidden items check box on the View ribbon of the Explorer window.
TIBCOfolder in this location. Right-click and drag it to the desktop, holding down the right-click mouse button all the way. Then release the mouse button, and select Create shortcut here from the pop-up menu.
Thereafter, double-click the desktop shortcut to the TIBCO Start menu items, where you can navigate the folders and double-click to launch any item.
On Windows 10, Start menu entries for TIBCO Spotfire Data Streams are placed
in a single
Windows 10 does not allow subfolders to appear in the Start menu. That is, in
Windows 7, the Start menu was organized with a top-level
TIBCO folder that contained subfolders for various StreamBase
components. However, Windows 10 now allows only the top-level
TIBCO folder in the Start menu, which means the contents of the
previous release subfolders are concatenated into a single folder.
If you have a single TIBCO product installed, the Windows 10 Start menu
organization works well. However, if you have more than one TIBCO product
installed, all Start menu entries from all products appear together in one long
Of course, the installers for existing products cannot be retroactively reconfigured to install each TIBCO product into its own top-level Start menu folder. Eventually, newer releases of TIBCO product installers, including installers for TIBCO Spotfire Data Streams, will catch up with the new restrictions imposed by Windows 10.
In the meantime, you can manually reorganize your Start menu to place the menu entries for each TIBCO product into their own top-level, product-specific Start menu folder. Follow these steps:
Use one the following Windows 10 key combinations:
Enter Windows-key+R and type
shell:common start menu. Use this method if you installed your TIBCO product in a system-controlled folder such as
C:\Program Files. (By default, TIBCO Spotfire Data Streams is installed in
Enter Windows-key+R and type
shell:start menu. Use this method if you installed your TIBCO product in a personal folder as part of your Windows home directory.
This opens a new Explorer window to the top of the System or Personal Start menu, respectively. Double-click
Programsto enter the Start menu folder itself.
Look for a folder named
TIBCO. If not found, use the other key combination and look again. (It is also possible to have a
TIBCOfolder in both Start menu locations.)
Look inside the
TIBCOfolder. If it contains subfolders for the product of interest, move each entire subfolder, one at a time, one level up to become a sibling of the
Rename each moved subfolder so that it begins with "TIBCO". This keeps all TIBCO products alphabetically together in the Start menu. For example, move
StreamBaseup parallel to its containing
TIBCOfolder, and rename it
TIBCO StreamBase. Do the same for any
Live Datamartsubfolder you may have.
If you have other TIBCO products installed, including other versions of StreamBase, move their subfolders or move their individual menu entries for each product in turn.
TIBCOfolder contains individual menu entries instead of, or alongside subfolders, create new top-level folders, parallel to
TIBCO, to contain the Start menu entries for each product of interest.
Move the appropriate menu entries from the
TIBCOfolder to the newly created top-level folder.
TIBCOfolder is empty — that is, when all of its contents have been moved up to new top-level folders — you can delete the empty
TIBCO provides separate installer files for the Excel Add-in, certain additional adapters, and add-in products such as the High-Performance FIX Engine.
As downloaded from the TIBCO distribution site, the installers are delivered in a
single file named with the following pattern:
productid identifies the add-in or
servicepack identify the specific release, and
arch identifies the targeted CPU
x86 for 32-bit or
x86_64 for 64-bit.
After completing the installation of StreamBase on Windows, you can next install any external adapter or add-in product for which you have a license, using its separate installer.
The installers for most add-in products look for a matching StreamBase base release, and only allow installation of the product into that base release's directory. By contrast, external adapters can be installed on a machine that does not have a StreamBase installation.
On Windows, the StreamBase Runtime and all StreamBase command-line utilities must be run from a StreamBase Command Prompt that you invoke from the Windows Start menu or from a shortcut on the Windows Desktop. Do not use the standard Windows command prompt. The StreamBase Command Prompt has its environment and PATH preconfigured for running StreamBase commands and utilities.
See Environment Settings for a table of the environment variables set by the StreamBase Command Prompt.
When you run a StreamBase application in StreamBase Studio (for example, by launching one of the demos in the SB Demos perspective), StreamBase Studio makes a local network connection to a StreamBase Server instance. When this connection is first attempted, your firewall or Internet security software may issue a warning message. Always select the Allow or Unblock option that allows StreamBase to make the connection.
In StreamBase Studio, the connection cannot proceed until you allow the firewall or Internet security software to let StreamBase make the connection.
The message may refer to StreamBase Server, or
sbstudio.exe (StreamBase Studio), or
javaw.exe (Java). You may see separate messages for internal
all cases, allow StreamBase Studio to make the connection. StreamBase is not performing an outgoing connection of any kind.
You may see similar messages if you select options on the StreamBase Studio Welcome page that access an external website.
You are welcome to use a third-party command-line environment such as the Linux-like environment provided by Cygwin, as long as you are comfortable configuring that environment. StreamBase formally supports using StreamBase command and the mvn command using the StreamBase Command Prompt.
The primary caution about using Cygwin, MSys, or the Windows 10 Ubuntu subsystem is to make sure the subsystem has the same sense of home directory as the StreamBase Command Prompt or as Windows command prompts in general.
StreamBase Studio's embedded Maven subsystem writes to a critically important local
repository stored by default in your Windows home directory, in a folder named
.m2. If your Linux-like subsystem has a different
meaning for your home directory, then it might try to create and use a different and
.m2 directory in a different location.
You can set environment variables to reconcile the meaning of HOME in the various
systems. As an alternative, you can set up custom
settings.xml files for your different Maven installations to make
sure they use the same local repository directory. See the online Maven documentation
for further details.